Blitz btsc 1 контроллер дроссельной заслонки
Фортунер 2021 г.в. 2.7 литра АКПП.
Фотку с интернета взял — две большие кнопки сразу за селектором АКПП в сторону подлокотника.
В том же самом интернете (не помню уже где) читал, что типа при включении Пауэр меняется чувствительность электронной педали газа, алгоритм работы АКПП, и, вроде бы, даже какая-то коррекция в ДВС производится — для повышения приемистости. Технические моменты не знаю — за что купил, за то продал.
Соответственно, кнопка ЭКО — принудительная кастрация всех систем с целью снижения расхода топлива и выбросов в атмосферу.
Езжу, не пользуясь ни той, не этой, когда тошню по-пенсионерски — загорается на приборке надпись ЭКО, тапку давану — тухнет.
Изменено 25 января 2020 пользователем Duke Nukem
§
Интересная тема. Сначала про электронную приблуду для электронной же педали газа. Затем про говенные АКПП на новых Фортунерах, где в качестве аргументов прилагаются негативные отзывы на автоматы другой модели, которая вообще из предыдущего поколения. А затем выложены два клипа про 10-ку самых лучших внедорожников в истории и про топ самых ненадежных авто, в обоих подборах Фортунер вообще отсутствует — к чему они тогда?!!
ПС. В обзоре про 10ку лучших джипов согласен с половиной списка, половину же списка в наших местах отсеивает естественный отбор — страшно ломучие и дорогие по запчастям, притом эти запчасти еще и ждать надо. Тот случай, когда пофигу, каковы машины в плане проходимости, если они постоянно в ремонте зависают. Намекну — это не про японцев!))) Кстати, а почему Прадоса в 70м кузове забыли — вот уж настоящая легенда, а не это вот все!
Blitz throttle controller — manual (page 2)
Please read carefully and understand the contents.
・This product improves the body accelerating sensation but does not increase horse power output. It controls the
throttle signal by opening the throttle more than it is actually pressed on the accelerator (Gas pedal).
Moreover, please be forewarned that there are differences by individuals in the perceived accelerating sensation.
・Notes on “how to use this product”and “installation procedures”are explained in detail in this manual.
・Blitz Co., Ltd will not be reponsible of any breakage and malfunctions caused in by installing this products to a vehicle
already that has been installed with a third party’s product(s) and (or) to a reconstructed (modified) vehicle.
・Blitz Co., Ltd will not be reponsible of any breakage, malfunction and liabilities caused by wrong installation and usage.
・This product and its accessories may be changed without announcements for improvements.
・Install this rpoduct at a well-ventilated area.
Ignoring this indication may cause a fire and (or) an explosion.
・Install this product and its parts firmly at a secured place that would not be of any interference
while driving.
Ignoring this indication would cause an accident.
・This product is designed to work on a 12V DC, and the ground is designed to be the chassis fot the car.
It would cause a fire if this product is installed on a vehicle not powered by a 12V DC.
・Disconnect the harness’s connectors from the harness it selt. DO NOT pull from the harness.
It would cause a fire by a short circuit, breakage of electronic part(s) and (or) burn(s). Moreover, it would
cause some malfunction(s) to this product.
・Discontinue utilizing this product and contact us or our retailers if you notice some irregular noise
and (or) odor from this product.
Disregarding this (these) symptom(s), it would cause a fire, electrocution and (or) breakage of
electronic part(s).
・DO NOT operate this product while driving.
It would cause an accident.
・DO NOT damage any wiring(s) and (or) piping(s) from the engine room while installing this product.
It would cause a fire by a shor circuit, breakage to the engine, vehicle and (or) to the electronic part(s).
Insulate any unnecessary wiring(s) at the time of the installation.
Ignoring these indications may cause serious injuries or even death to the individual and (or) to a third
party.
DANGER
CAUTION
Ignoring these indications may cause serious injuries or injuries to the individual and (or) to a third party.
Ignoring these indications may cause injuries or minor injuries to the individual and (or) to a third
party. It may also cause malfunctions and breakages to the product and (or) to the vehicle.
ATTENTION
In order to use the product safely, please read the “SAFETY NOTICE” thoroughly.
Explanation of displayed terms.
－ Safety Notice －
CAUTION
Ignoring these indications may cause serious injuries of injuties to the individual and (or) to a third party.
2
§
・About the LCD screen.
The LCD screen may seem dark or distorted if seen through polarized sunglasses.
・Ask for a professional or a technician to perform the installation of this product.
The individual performing this installation must have technical skills and knowledge to perform this installation.
・Do not drop or insert extreme force to the product while installing it.
It would cause malfunctions.
・Does not heat the LCD screen over 60 degrees Celsius (140 degrees Fahrenheit) for a long period.
It would cause the LCD screen to go black.
・Do not misuse, abuse, alter, take apart and (or) modify this product in any way.
It would cause an accident, fire, electrocution, and breakage and (or) burn the electronic parts. If any of the above indications are
executed, the warranty of the product will be voided.
・Do not install this product at a location where it could get wet and (or) highly heated.
It would cause an electrocution, fire, breakage and (or) burns to the electronic components.
・Do not install this product while the engine and its components are hot; wait until they are fully cooled.
It would cause burn(s) to you or to a third party if the engine, radiator, and the exhaust system were still hot.
・Please perform regular maintenance and be extra cautious.
This product’s durability and components are thoroughly tested; however, depending on the vehicle’s driven condition and (or)
climate, the durability may decrease.
・Do not throw away the original detached components from the vehicle. Please keep the components at a secured location.
We are not liable from any damages caused to the components while installing it. Please be extra careful through the installation.
・Use the right tools to tighten the nuts and bolts.
It will damage the threads if you over tighten it or by using the wrong tools.
・This product has been designed and tested on vehicles with manufacturer’s original components.
It would cause malfunctions to the product or vehicle if you have already installed a third party’s product(s).
・Do not operate this product while driving.
It would cause an accident.
・Install the controller and the main unit where it does not interfere with the driving.
Be extra careful with the wiring at the accelerator sensor since it may cause engine failure or interfere the operation of the accelerator.
・This product is made for a purpose to control the stock electronic throttle. Therefore, there is a possibility of a fatal accident, damage
and (or) malfunction to the vehicle if the usage and installation is done incorrectly.
Please ask a professional or a technician with knowledge when performing the installation and wiring of this product.
・Discontinue utilizing this product immediately and contact a specialist to inspect and perform maintenance if you notice some
irregular vibration, noise and (or) odor from this product and (or) from the vehicle while driving.
It is very dangerous if you perform any repairs yourself. Please ask a professional with knowledge in performing any repairs.
・Ask a professional for an inspection or repair if you in a case the performance of the vehicle or product feels faulty.
There is a possibility that could lead to an unexpected trouble or an accident if driven without any action.
・Do not misuse, alter, take apart and (or) modify this product in any way.
Please be forewarned that Blitz Co., Ltd will not be liable in any circumstance(s) since it would not just cause an accident that results in
vehicle damage(s); but can also cause death.
CAUTION
Ignoring these indications may cause serious injuries of injuries to the individual and (or) to a third party.
Ignoring these indications may cause injuries or minor injuries to the individual and (or) to a third
party. It may also cause malfunctions and breakages to the product and (or) to the vehicle.
ATTENTION
3
§
§
※ This product is only made for vehicles with 12V DC. Do not install on a 24V DC vehicles or on any
other vehicle that is not a 12V DC.
It can cause a fire or damage(s) to the vehicle.
※The location of the installation is related where the electronic throttle is controlled.
Please be extra careful on the direction and contacting surface while perform the installation.
※If there is a loose connection, the engine will not rev-up properly and the engine check
lamp will light up. On some vehicles, a special equipment will be needed to erase the check lamp.
※Do not perform any installation for a few minutes after removing the key from the ingnition. There are vehicles that the
power does not shut off for over 5 minutes. Moreover, with smart entry systems, place the key far enough where it will
not detect it and perform the installation. There is a possibility that if the key is detected, it will automatically power
ON and the check lamp will come out when the connector is unplugged and it will enter to fail safe mode.
※Be extra careful since on some vehicles, a special equipment will be needed to deactivate the error code.
・Basically do not disconnect the battery while performing the installation. There is a possibility that the “Idle Learning”
time will be needed if the battery is disconnected.
・Be extra careful in the installation process such as the direction of the connectors, contact, etc; since the electronic
throttle controller which is a precision electronic device.
・Symptoms such as sluggish rev and light up of the engine check lamp will occur if the installation is performed
incorrectly. Fully understand the installation process and be extra careful since, as explained above, an engine
diagnosis equipment will be needed to deactivate the error code.
(1) Confirming the location of the accelerator position sensor.
Usually, the accelerator position sensor is located near the base of the accelerator (Gas) pedal.
(Excluding some vehicles). Look closely since usually it is hidden by a cover.
[Attention] Code No. 14671: TRC07C-BF2.
The accelerator position sensor is located at the engine
compartment with the vehicles that are compatible with
this product.
The area circled in white is the sensor. It cannot be installed if the shape of the connector from the
harness that it is included is different. Do not try to force if the shape of the connector is different.
As shown in the picture, it is located near the master back.
It is connected by a wire from the interior of the vehicle to
the sensor at the engine compartment. Connect the BF2 sensor
harness at this location by passing through the service hole and
connect it to the main unit.
— Installation —
Ignoring these indications may cause injuries or minor injuries to the individual and (or) to a third
party. It may also cause malfunctions and breakages to the product and (or) to the vehicle.
ATTENTION
■
Attention on Installation
5
§
§
§
§
(7) Please read again before driving
※ On AT vehicles and at high speed, the shifting point may feel different since the throttle is
opened even if the accelerator is not stepped. There fore, this is not a malfunction.
※ The boost characteristic may change on vehicles equipped with force induction system
such as turbo chargers. There is a high possibility that the boost has to be readjusted on
vehicles that have been boosted up or the turbo has been changed.
※ As a safety function, this product is configured to turn OFF itself every time the engine is
turned OFF. For example, the engine is turned OFF while it is set at SP3. It will be set at
SP3 once the engine is turned ON and the driver powers ON the throttle controller.
However there is an exception. In a situation when the driver turns the engine OFF after
turning OFF the throttle controller that was set at SP3 mode. It will be set as OFF after
the engine is turner ON. However, it will not be set at SP3 after turning ON the throttle
controller. Instead it will be set as ECO. This is not a malfunction.
CAUTION
It is very dangerous in a situation when the vehicle goes to Fail Safe Mode and
the engine does not rev up. Stop the vehicle at a safe location, shut the engine
OFF, wait for 5 minutes and then start the engine again.
【Unstable engine idle】
※ Is the “Activation Indicator” at the controller lighted when the gas pedal is not stepped?
If it is lighted, the activation point (when the throttle controller is activated) has to be
adjusted. Contact the dealer or distributor who you purchased it from.
※ In a situation that the battery has been disconnected for installation, there is a possibility
that “Idling Learning” is necessary. Please consult at a car dealer.
【Display not turning OFF for a while after shutting the engine off】
※ There are times that the display does not turn OFF after the ignition is turned OFF. The
reason for this is because minute amount of electricity flow is left at the sensor. This is
not a malfunction. However, contact the dealer or distributor who you purchased it from if
the display does not turn OFF for over 30 minutes. (On some Nissan and Infiniti, the
display will take about 30 minutes to turn OFF. The display will turn off in about 5
minutes on 07/10 Honda Fit)
【Light up of Engine Check Lamp, Engine Failure】
※ Verify the contact of the connectors, wiring and direction of the connectors.
※ Change the location where the power was taken from, if it was taken from a 12V ACC
or the voltage is not 12V.
※ There is a connector similar to the accelerator sensor in the engine compartment and it
will not operate properly if it is connected to it. Make sure to connect it to the accelerator
sensor at the interior of the vehicle. (There is an exception on some vehicles that it has
to be connected at the engine compartment)
【Light up of engine check lamp because of installation error】
(8) Trouble Shooting
(9) Regarding reverse cancel harness
It is an optional harness that deactivated the Throttle controller when in reverse.
(Sold separately)
It is connected to the 10th PIN at the controller and to the vehicle’s 12V reverse
switch.
Code No. 14966. Reverse Cancel Harness
Turn OFF the Throttle Controller OFF when reversing for parking.
9
